CAW-N66OZD Awning Window
CAW-N66OZD is a non thermal break awning window system which is suitable for commercial and residential building. Compatiable with double glazed unit, It can satisfy our daily thermal insulation and provide a good performance in sound insulation.
- Overview
- Data
- Benefit
- Configuration
Overview of CAW-N66OZD Awning Window
| System | Awning Window(Non Thermal Break) |
| Model No. | CAW-N66OZD |
| Material | Aluminum Alloy/Glass |
| Hardware | Chinese top brand(Kin Long)/Germany brand |
| Glass Type | Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak |
| Cooperated Glass Brand | Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/Kibing/CNG/TaiwanGlass |
| Surface Treatment | Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain |
| Profile Brand | 6063-T5/6063-T6 |
| Themral Profile | Non-Thermal Break |
| Standards | In Complianca With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO |
| Application | Residential Apartment,Villa/Commercial Hotel,Mall,Office,Public Organization |
| System Customziation | Available |
Data of CAW-N66OZD Awning Window
Testing Data of CAW-N66OZD Awning Window
| Design Wind Pressure | Wsls=+2.06KPA/-2.06KAP, Wuls=+3.20KPA/-3.20KPA | |
| Test | Pressure | Results |
| Preloading(Clause 8.2.2 of AS/NZS4284:2008） | +2.06kpa | No separation, plastic deformations or deleterious was observed |
| -2.06kpa | ||
| Preliminary Water Penetration Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284:2008) | +774kPa | No water leakage was observed. |
| Preliminary Water Penetration Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284:2008) | 387-774-387 (Pa) | No water leakage was observed. |
| 516-1032-516 (Pa) | ||
| 774-1548-774 (Pa) | ||
| Structural Test at Serviceability Limit State Wind Pressure (Wsls)(Clause 8.3 of AS/NZS 4284:2008) | +2.06kpa | During the structural test at SLS wind pressure, the deflections of all related members were within the allowable deflection limits. |
| -2.06kpa | ||
| Operating force test (AS 2047-2014) | -- | The operating force was within the allowable value. |
| Air Infiltration Test (Clause 8.4 of AS/NZS 4284:2008) | +/-150Pa | The rate of air leakage of the specimen was within the allowable values. |
| Water Penetration Test under Static Water Penetration Test under Static 4284:2008) | +774Pa | No water leakage was observed. |
| Water Penetration Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284:2008) | 387-774-387 (Pa) | No water leakage was observed. |
| 516-1032-516 (Pa) | ||
| 774-1548-774 (Pa) | ||
| Structural ProofTest at Ultimate Limit State Wind Pressure (Wuls) (Clause 8.8 of AS/NZS 4284:2008) | +3.20kpa | No collapse of the test specimen was observed under the specified pressure. |
| -3.20kpa | ||
Thermal Data of CAW-N66OZD Awning Window
| NFRC Procedures | NFRC100SB, NFRC200-2010 and NFRC500-2010 |
| Software Tools | THERM 7.4.3.0 and WINDOW 7.4.6.0 |
| Configuration | 6mm Clear(CLR-TDE52C) + 12mm ARGON + 6mm Clear |
| Panel Dimension | 1100mm Wide x 1100mm High |
| Frame | Painted Aluminum |
| Panel U-value | 2.224W/m2k |
| Visible Light Transmission | 0.302 |
| SHGC | 0.143 |
Frame Data of CAW-N66OZD Awning Window
| Parts Location | Frame Area/m2 | Edge Area/m2 |
U-Value(Frame) W/m2k |
U-Value(Edge) W/m2k |
| Header | 0.1331 | 0.0396 | 9.3299 | 1.6863 |
| Upper Left Jamb | 0.1177 | 0.0737 | 4.4550 | 1.5047 |
| Upper Right Jamb | 0.1177 | 0.0737 | 4.4550 | 1.5047 |
| Mullion | 0.0759 | 0.0770 | 5.0050 | 1.5091 |
| Lower Left Jamb | 0.0495 | 0.0814 | 6.8662 | 1.5452 |
| Lower Right Jamb | 0.0495 | 0.0814 | 6.8662 | 1.5452 |
| Sill | 0.0550 | 0.0462 | 16.2550 | 2.1248 |
Glass Data of CAW-N66OZD Awning Window
| Glass Data:6mm LB13-45#2HS+12AR+6mm Clear HST | |||||||
| Visible Light | SHGC | SC |
NFRC U-value W/m3k(Argon) |
STC | |||
| T% | R-out% | R-in% | Winter | Summer | |||
| 51.9 | 23 | 15 |
|
0.271 | 1.368 | 1.294 | 36 |
Benefit of CAW-N66OZD Awning Window
-
Aluminum profile width: 66mm, T=1.6mm European - standard notch.Applicable to Fixed Windows, Awning Windows, Casement Windows, Horizontal Pivoting Windows. The extra-long frame can be combined with pipe-type installation & Australian installation (waterproof rubber strip at the bottom).
-
Standard configuration: 6mm+12A+6mm insulating glass. Other configurations can be equipped with the same standard thickness, such as DGU, laminated glass, etc.
-
This Window frame adopts aluminum profiles with a 45° angle and adopts a special assembly bracket to join with the corner piece, has a firm structure & beautiful appearance. Screen windows can prevent mosquitoes and wind. Installation, disassembling, and maintenance are simple. The "hiding-inside" design perfectly merges the screen with the profiles, making a delicate appearance.
-
Hand-cranked Rail Mounted hung windows can adjust the opening angle.
Configuration of CAW-N66OZD Awning Window
Recommended CAS Facade Products
