CAW-TB66CX Awning Window (Thermal Break)
CAW-TB66CX is a high performance awning window system with thermal break profiles. The system offers high thermal insulation and watertightness performances, which in combination with the high sound reduction make it ideal for the most demanding projects.
- Overview
- Data
- Benefit
- Configuration
Overview of CAW-TB66CX Awning Window (Thermal Break)
| System | Awning Window(Thermal Break) |
| Model No. | CAW-TB66CX |
| Material | Aluminum Alloy/Glass |
| Hardware | Chinese top brand(Kin Long)/Germany brand |
| Glass Type | Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak |
| Cooperated Glass Brand | Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/Kibing/CNG/TaiwanGlass |
| Surface Treatment | Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain |
| Profile Brand | 6063-T5/6063-T6 |
| Themral Profile | Thermal Break |
| Standards | In Complianca With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO |
| Application | Residential Apartment,Villa/Commercial Hotel,Mall,Office,Public Organization |
| System Customziation | Available |
Data of CAW-TB66CX Awning Window (Thermal Break)
Testing Data of CAW-TB66CX Awning Window (Thermal Break)
| Test | Pressure | Results |
| Preloading(Clause 8.2.2 of AS/NZS4284:2008） | +2.06kpa | No separation, plastic deformations or deleterious was observed |
| -2.06kpa | ||
| Preliminary Water Penetration Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284:2008) | +774kPa | No water leakage was observed. |
| Preliminary Water Penetration Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284:2008) | 387-774-387 (Pa) | No water leakage was observed. |
| 516-1032-516 (Pa) | ||
| 774-1548-774 (Pa) | ||
| Structural Test at Serviceability Limit State Wind Pressure (Wsls)(Clause 8.3 of AS/NZS 4284:2008) | +2.06kpa | During the structural test at SLS wind pressure, the deflections of all related members were within the allowable deflection limits. |
| -2.06kpa | ||
| Operating force test (AS 2047-2014) | -- | The operating force was within the allowable value. |
| Air Infiltration Test (Clause 8.4 of AS/NZS 4284:2008) | +/-150Pa | The rate of air leakage of the specimen was within the allowable values. |
| Water Penetration Test under Static Water Penetration Test under Static 4284:2008) | +774Pa | No water leakage was observed. |
| Water Penetration Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284:2008) | 387-774-387 (Pa) | No water leakage was observed. |
| 516-1032-516 (Pa) | ||
| 774-1548-774 (Pa) | ||
| Structural ProofTest at Ultimate Limit State Wind Pressure (Wuls) (Clause 8.8 of AS/NZS 4284:2008) | +3.20kpa | No collapse of the test specimen was observed under the specified pressure. |
| -3.20kpa |
Thermal Data of CAW-TB66CX Awning Window (Thermal Break)
| NFRC Procedures | NFRC100SB, NFRC200-2010 and NFRC500-2010 |
| Software Tools | THERM 7.4.3.0 and WINDOW 7.4.6.0 |
| Configuration | 6mm Clear(CLR-TDE52C) + 12mm ARGON + 6mm Clear |
| Panel Dimension | 1100mm Wide x 1100mm High |
| Frame | Painted Aluminum |
| Panel U-value | 1.832/m2k |
| Visible Light Transmission | 0.302 |
| SHGC | 0.138 |
Frame Data of CAW-TB66CX Awning Window (Thermal Break)
| Parts Location | Frame Area/m2 | Edge Area/m2 |
U-Value(Frame) W/m2k |
U-Value(Edge) W/m2k |
| Header | 0.1398 | 0.0416 | 8.2103 | 1.4839 |
| Upper Left Jamb | 0.1236 | 0.0774 | 3.9204 | 1.3241 |
| Upper Right Jamb | 0.1236 | 0.0774 | 3.9204 | 1.3241 |
| Mullion | 0.0797 | 0.0809 | 4.4044 | 1.3280 |
| Lower Left Jamb | 0.0520 | 0.0855 | 6.0423 | 1.3597 |
| Lower Right Jamb | 0.0520 | 0.0855 | 6.0423 | 1.3597 |
| Sill | 0.0578 | 0.0485 | 14.3044 | 1.8698 |
Glass Data of CAW-TB66CX Awning Window (Thermal Break)
| Glass Data: 6mm LB13-45#2HS+12AR+6mm Clear HST | |||||||
| Visible Light | SHGC | SC |
NFRC U-value W/m3k(Argon) |
STC | |||
| T% | R-out% | R-in% | Winter | Summer | |||
| 51.9 | 23 | 15 |
|
0.271 | 1.368 | 1.294 | 36 |
Benefit of CAW-TB66CX Awning Window (Thermal Break)
-
Aluminum profile width: 66mm, T=1.4mm. Applicable to Fixed Windows, Awning Windows. The extra-long frame can be combined with pipe-type installation & Australian installation (waterproof rubber strip at the bottom).
-
Standard configuration: 6+12A+6mm double glazing glass or other configuration with the same thickness, such as DGU, laminated glass, glass built-in shutter, etc.
-
Good heat insulation and sound insulation. Window frame with a 45° angle and adopt a special assembly bracket to join with the corner piece. Firm structure & beautiful appearance.
-
Screen windows can prevent mosquitoes and wind. Installation, disassembling, and maintenance is simple. The screen window hides in the aluminum frame, perfect integration, and aesthetic appearance.
Configuration of CAW-TB66CX Awning Window (Thermal Break)
Recommended CAS Facade Products
