CSW-TB101D Sliding Window (Thermal Insulation)
CSD-TB101D is a thermal insulated sliding window system for residential and commercial usage. This system make thermal break system affordable, and still keep a high requirement in U-value. Outstanding water draining ability can deal with extreme weather.
- Overview
- Data
- Benefit
- Configuration
Overview of CSW-TB101D Sliding Window (Thermal Insulation)
System | Sliding Window(Thermal Break) |
Model No. | CSW-TB101D |
Material | Aluminum Alloy/Glass |
Hardware | Chinese top brand(Kin Long)/Germany brand |
Glass Type | Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak |
Cooperated Glass Brand | Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/Kibing/CNG/TaiwanGlass |
Surface Treatment | Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain |
Profile Brand | 6063-T5/6063-T6 |
Thermal Profile | Thermal Break |
Standards | In Compliance With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO |
Application | Residential Apartment, Villa/Commercial Hotel, Mall, Office, Public Organization |
System Customisation | Available |
Data of CSW-TB101D Sliding Window (Thermal Insulation)
Testing Data of CSW-TB101D Sliding Window (Thermal Insulation)
Test | Pressure | Results |
Open and Close Operable Sash Test (AS 2047 & AS/NZS 4420.1-2016) | -- | No damage was observed after the test. |
Preloading (AS 2047 & AS/NZS 4420.1-2016) |
+0.81kPa -0.85kPa |
No separation, plastic deformations, or deleteriousness was observed. |
Structural Test at Serviceability Limit State Wind Pressure (Walls) (AS2047 & AS/NZS 4420.1-2016) |
+1.62kPa -1.69kPa |
No glass breakage, collapse, and permanent deformation were observed. Deflections of mullions and transoms, as well as glass panels, were within the allowable deflection limits. |
Operating Force Test (AS 2047 & AS/NZS 4420.1-2016) | -- | The operating force of the specimen was within the allowable value. |
Air Infiltration Test (AS 2047 & AS/NZS 4420.1-2016) |
300Pa -300Pa |
The rate of air leakage of the specimen was within the allowable values. |
Water Penetration Test under Static Pressure (AS 2047 & AS/NZS 4420. 1-2016) | +486Pa | No water leakage was observed. |
Structural Proof Test at Ultimate Limit State Wind Pressure (Wells) (AS 2047 & AS/NZS 4420.1-2016) |
+2.50kpa -2.60kpa |
There was no collapse of the test sample. |
Thermal Data of CSW-TB101D Sliding Window (Thermal Insulation)
NFRC procedures | NFRC100SB, NFRC200-2010 and NFRC500-2010 |
Software tools | THERM 7.4.3.0 and WINDOW 7.4.6.0 |
2. Standard configuration | 6+12A+6mm insulated glass, or options of other DGU/Laminated glass with thickness less than this size. |
Panel Dimension | 1550mm Wide 1200mm High |
Frame | Painted Aluminum |
Panel U-value | 2.089W/m2k |
Visible Light Transmission | 0.396 |
SHGC | 0.33 |
Condensation Resistant | 28.1 |
Frame Data of CSW-TB101D Sliding Window (Thermal Insulation)
Parts Location | Frame Area/m2 | Edge Area/m2 |
U-Value(Frame) W/m2k |
U-Value(Edge) W/m2k |
Header | 0.1016 | 0.0412 | 6.3361 | 1.1452 |
Left Jamb | 0.2738 | 0.1294 | 3.0255 | 1.0219 |
Mullion | 0.0983 | 0.2520 | 3.0255 | 1.0219 |
Right Jamb | 0.2864 | 0.1294 | 3.3990 | 1.0248 |
Sill | 0.0924 | 0.0412 | 6.3361 | 1.1452 |
Glass Data of CSW-TB101D Sliding Window (Thermal Insulation)
Glass Data: 6mm HS (CAVS S1)#2 +12Ar +6-T-HST | |||||||
Visible Light | SHGC | SC |
NFRC U-value W/m3k(Argon) |
STC | |||
T% | R-out% | R-in% | Winter | Summer | |||
72 | 12 | 12 | 0.55 | 0.63 | 1.55 | 1.54 | 36 |
Benefit of CSW-TB101D Sliding Window (Thermal Insulation)
-
Aluminum profile width: 101.6mm, T=1.8mm. Excellent thermal barrier strips ensure high-performance heat insulation. It can perfectly join with CAS' other series windows to make a combination.
-
Standard configuration: 6+12A+6mm insulated glass, or options of other DGU/Laminated glass with thickness less than this size.
-
A high bottom track design can prevent water inflow. At the same time, due to the unique drainage system, it can help to drain out water within a short time at extreme weather.
-
The bottom rail is covered by a cover plate to form a fixed sash and an incredible performance of sealing and sense of integrity, with the function of anti-theft.