CFW-N116E Fixed Window
CFW-N116E is a modern designed aluminum window system, it can be applied to fixed windows, casement windows,s and awning windows, also suitable for glass wall partitions. Without the opening parts, it cost less and also needs minimum maintenance.
- Overview
- Data
- Benefit
- Configuration
Overview of CFW-N116E Fixed Window
| System | Fixed Window(Non-Thermal Break) |
| Model No. | CFW-N116E |
| Material | Aluminum Alloy/Glass |
| Hardware | Chinese top brand(Kin Long)/Germany brand |
| Glass Type | Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak |
| Cooperated Glass Brand | Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/Kibing/CNG/TaiwanGlass |
| Surface Treatment | Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain |
| Profile Brand | 6063-T5/6063-T6 |
| Thermal Profile | Non-Thermal Break |
| Standards | In Compliance With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO |
| Application | Residential Apartment, Villa/Commercial Hotel, Mall, Office, Public Organization |
| System Customisation | Available |
Data of CFW-N116E Fixed Window
Testing Data of CFW-N116E Fixed Window
| Test | Pressure | Results |
| Preloading(Clause 8.2.2 of AS/NZS4284:2008） | +2.58kpa | No separation, plastic deformations or deleterious was observed |
| -2.58kpa | ||
| Preliminary Water Penetration Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284:2008) | +774kPa | No water leakage was observed. |
| Preliminary Water Penetration Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284:2008) | 387-774-387 (Pa) | No water leakage was observed. |
| 516-1032-516 (Pa) | ||
| 774-1548-774 (Pa) | ||
| Structural Test at Serviceability Limit State Wind Pressure (Wsls)(Clause 8.3 of AS/NZS 4284:2008) | +2.58kpa | During the structural test at SLS wind pressure, the deflections of all related members were within the allowable deflection limits. |
| -2.58kpa | ||
| Operating force test (AS 2047-2014) | -- | The operating force was within the allowable value. |
| Air Infiltration Test (Clause 8.4 of AS/NZS 4284:2008) | +/-150Pa | The rate of air leakage of the specimen was within the allowable values. |
| Water Penetration Test under Static Water Penetration Test under Static 4284:2008) | +774Pa | No water leakage was observed. |
| Water Penetration Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284:2008) | 387-774-387 (Pa) | No water leakage was observed. |
| 516-1032-516 (Pa) | ||
| 774-1548-774 (Pa) | ||
| Structural ProofTest at Ultimate Limit State Wind Pressure (Wuls) (Clause 8.8 of AS/NZS 4284:2008) | +4.00kpa | No collapse of the test specimen was observed under the specified pressure. |
| -4.00kpa |
Thermal Data of CFW-N116E Fixed Window
| NFRC Procedures | NFRC100SB, NFRC200-2010 and NFRC500-2010 |
| Software Tools | THERM 7.4.3.0 and WINDOW 7.4.6.0 |
| Configuration | 6mm Clear(CLR-TDE52C) + 12mm ARGON + 6mm Clear |
| Panel Dimension | 1100mm Wide x 1100mm High |
| Frame | Painted Aluminum |
| Panel U-value | 2.679W/m2k |
| Visible Light Transmission | 0.311 |
| SHGC | 0.166 |
Frame Data of CFW-N116E Fixed Window
| Parts Location | Frame Area/m2 | Edge Area/m2 |
U-Value(Frame) W/m2k |
U-Value(Edge) W/m2k |
| Header | 0.0783 | 0.0686 | 5.6274 | 1.9007 |
| Left Jamb | 0.0783 | 0.0686 | 5.6274 | 1.9007 |
| Right Jamb | 0.0783 | 0.0686 | 5.6274 | 1.9007 |
| Sill | 0.0783 | 0.0686 | 5.6274 | 1.9007 |
Glass Data of CFW-N116E Fixed Window
| Glass Data:6mm LB13-45#2HS+12AR+6mm Clear HST | |||||||
| Visible Light | SHGC | SC |
NFRC U-value W/m3k(Argon) |
STC | |||
| T% | R-out% | R-in% | Winter | Summer | |||
| 51.9 | 23 | 15 |
|
0.271 | 1.368 | 1.294 | 36 |
Benefit of CFW-N116E Fixed Window
-
Aluminium profile width: 101.6mm, T=2.0mm. Applicable to Fixed Windows, Awning Windows, Side-hung Doors Combination, Swing Doors Combination, and Extra-long frames can be combined with pipe type installation, inflection point type installation, and Australian installation(waterproof rubber strip at the bottom).
-
Standard configuration: 6+12A+6mm double glazing glass or other configuration with the same thickness, such as DGU, laminated glass, glass built-in shutter, etc.
-
This series can be combined flexibly, it is easy to install, has a beautiful appearance, firm structure, and excellent waterproof performance. What's better, in line with the aluminum sub-frame, it adopts push mosaic installation to reduce the cost and time of installation. Especially it can make a big area of curtain wall, combine the advantages of "unit type curtain wall" to achieve a unique effect.
Configuration of CFW-N116E Fixed Window
Recommended CAS Facade Products
